Universal Electronics CONTROL 2 Bedienungsanleitung PDF herunterladen (Seite 8)

PROGRAMMING MASTER POWER KEY

The Potenza ST Remote Control has a unique feature that allows you to sequentially turn up to

five of your home entertainment devices on or off with a single key press.

Note: The Master Power (POWER) only works in STB mode. If it is not programmed, only the

set-top box will turn on or off. In any other mode, pressing Master Power (POWER) once will

turn the selected device on or off.

Programming the Master Power Key

1. Press and hold SETUP key until the last device key blinks twice.

2. Enter 9 9 5 and release.

Note: The LED will blink 2 times after any three-digit programming sequence is entered correctly

3. Press POWER once.

4. Press device keys you want in the power sequence (STB, TV, AUD, DVD, VCR).

Press and hold SETUP

key until the last device key blinks twice

(3 seconds).

play back

the power sequence, press the POWER

key while in STB mode.

Clearing the Master Power Key

1. Press and hold SETUP key until the last device key blinks twice.

2. Enter 9 9 5 and release.

Note: The LED will blink 2 times after any three-digit programming sequence is entered correctly

3. Press POWER key and release.

Press and hold SETUP

key

until the STB key blinks twice

(3 seconds).

PROGRAMMING CHANNEL CONTROL LOCK

By default, the remote control’s channel-control capabilities are not locked to the set-top box

mode

However, you can activate the feature to lock these keys to the STB Mode. This will

guarantee you do not inadvertently change a channel on your TV or VCR.

The affected keys are 1 through 0, CH+, CH-, and LAST.

Locking Channel Control (to a Source Mode)

1. Press and hold SETUP key until it blinks twice.

2. Enter 9 7 3 and release.

Note: The LED will blink 2 times after any three-digit programming sequence is entered correctly.

3. Press the CH+ key and release.

4. Press the STB device key to lock channel control to the STB mode.

*Default channel control lock is in unlocked state.

Un-Locking Channel Control

1. Press and hold SETUP key until it blinks twice.

2. Enter 9 7 3 and release.

Note: The LED will blink 2 times after any three-digit programming sequence is entered correctly.

3. Press the CH- key and release.

*Default channel control lock is in unlocked state.

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 26 27

Kommentare zu diesen Handbüchern

Keine Kommentare

Uni t UT581 Manuál s instrukcemi (20 strany)

Značka: Uni-t | Kategorie: Multimeters | Velikost: 0.43 MB |

Tabulka s obsahem

Digital RCD (ELCB)Tester

Instruction Manual

UT581/582

CONTENTS

1. Safety Instructions

2. Characteristics

3. General Specications

UT581/582 INSTRUCTION MANUAL

Diagram 1

△n Button

Red (Live)

Green ( Earth )

Blue ( Neutral )

6. Maintenance & Repair

Další produkty a příručky pro Multimetry UNI-T

Modely	Typ Dokumentu
UT601	Manuál s instrukcemi UNI-T UT601 Instruction manual, 13 stránky
UT60D	Specifikace UNI-T UT60D Specifications, 42 stránky
UT202A	Specifikace UNI-T UT202A Specifications, 32 stránky
UT321	Specifikace UNI-T UT321 Specifications, 11 stránky
UT50C	Specifikace UNI-T UT50C Specifications, 36 stránky
UT233	Specifikace UNI-T UT233 Specifications, 49 stránky
UT502	Specifikace UNI-T UT502 Specifications, 32 stránky
UT713	Specifikace UNI-T UT713 Specifications, 25 stránky
UT60A	Uživatelský manuál Fluke 233 review, 17 stránky
UT202A	Uživatelský manuál Návod k obsluze, 21 stránky
UT202A	Specifikace UNI-T UT202A Specifications, 25 stránky
UT382	Manuál s instrukcemi UNI-T UT382 Instruction manual, 22 stránky
UT60C	Specifikace UNI-T UT60C Specifications, 27 stránky
UT321	Uživatelský manuál UNI-T UT321 User`s manual, 94 stránky
UT207A	Uživatelský manuál UT207A, UT208A, UT209A PROVOZNÍ MANUÁL, 20 stránky
UT712	Specifikace UNI-T UT712 Specifications, 24 stránky
UT39E	Specifikace UNI-T UT39E Specifications, 24 stránky
UT81B	Uživatelský manuál UT81B Multimetr cyfrowy Oscyloskop INSTRUKCJA OBSŁUGI UNI-T®, 17 stránky
UT531	Uživatelský manuál Műszerkatalógus megtekintése! [en] , 92 stránky
UT321	Uživatelský manuál UNI-T UT321 User`s manual, 8 stránky

Universal Electronics CONTROL 2 Bedienungsanleitung Seite 8

Kommentare zu diesen Handbüchern

UNI-T UT581 manuály

Uni t UT581 Manuál s instrukcemi (20 strany)

Tabulka s obsahem

Další produkty a příručky pro Multimetry UNI-T

Universal Electronics CONTROL 2 Bedienungsanleitung Seite 8

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Fernbedienungen Universal Electronics CONTROL 2

UNI-T UT581 manuály

Uni t UT581 Manuál s instrukcemi (20 strany)

Tabulka s obsahem

Další produkty a příručky pro Multimetry UNI-T