Universal Electronics Millenium 4 Betriebsanweisung PDF herunterladen (Seite 30)

TROUBLESHOOTING

PROBLEM: LED does not blink when you press a key.

SOLUTION: Replace the batteries with two (2) new AA

alkaline batteries (see page 7).

PROBLEM: LED blinks when you press a key, but home

entertainment component does not respond.

SOLUTION: Make sure you are aiming the Millennium 4 at

your home entertainment component and that

you are within 15 feet of the component you are

trying to control.

PROBLEM: The Millennium 4 does not control home

entertainment components or commands are

not performing properly.

SOLUTION: Try all listed codes for the component brand

being set up. Make sure all components can be

operated with an infrared remote control.

PROBLEM: TV/VCR combo does not respond properly.

SOLUTION: Use the VCR codes for your brand. Some combo

units may require both a TV code and a VCR

code for full operation (see page 16).

PROBLEM: No volume on a second TV.

SOLUTION: Follow instructions in Changing Volume Lock

(see page 28).

PROBLEM: CH+ , CH - ,and LAST do not work for your

RCA TV.

SOLUTION: Due to RCA design (1983-1987), only the original

remote control will operate these functions.

PROBLEM: Changing channels does not work properly.

SOLUTION: If original remote control required pressing

ENTER to change channels, press ENTER on the

Millennium 4 after entering a channel number.

PROBLEM: Tried “Search Method”and still could not find a

working code.

SOLUTION: Try the “Search Method”again after clearing out

the device key as follows: Press and hold SETUP

until the LED (red light) blinks twice,then

release.Next enter 9 - 9 - 2. Then press and

release the device key to be cleared twice.

PROBLEM: Remote control does not turn on Sony or Sharp

TV/VCR Combo.

SOLUTION: For power on, these products require program-

ming TV codes on the Millennium 4. For Sony,

use TV code 0000 and VCR code 0032. For Sharp,

use TV code 0093 and VCR code 0048.

Millennium 4 Mnl M4094 rev 12/27/02 11:00 AM Page 30

1 2 ... 25 26 27 28 29 30 31 32

Kommentare zu diesen Handbüchern

Keine Kommentare

Universal Electronics Millenium 4 Betriebsanweisung Seite 30

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Fernbedienungen Universal Electronics Millenium 4